We’re not going out on a limb when we say hardwood floors are one of the most popular, value-adding features in your home. Home-buyers love ‘em.
But what about the regular maintenance, like refinishing, these floors require keep them looking sleek for years to come?
How much wear and tear your floors get determines how often you need to refinish them and what product you use. A household with just two adults might only have to refinish every 10 years; a home with adults, kids, and a dog might need to refinish every three to four years.
There are a lot of finishes out there. Use our at-a-glance guide below to choose the one that’s right for your home.
|Easy to apply||Not as durable as poly finishes|
|Low luster||Susceptible to stains|
|Penetrates into wood||Needs regular upkeep (refinishing)|
|Mild odor||Must be completely removed before applying a polyurethane finish|
Wax is the time-tested, old-fashioned way to refinish wood floors and was routinely used before polyurethanes became available in the 1970’s. Both paste and liquid versions are making a comeback with homeowners who want a mellow, low-sheen look, and with those who prefer to use natural products with low VOCs and toxicity.
It’s applied by hand, working small areas at a time, which makes it DIY-friendly (but labor-intensive). It’s also easy to touch up a wax finish, so ongoing maintenance is simple.
If you don’t want to darken your wood (which wax tends to do), first apply a base coat of shellac or sanding sealer that penetrates and seals the wood. Two to three coats of wax are recommended.
Especially good for: antique flooring in historic homes
Cost: $10 to $25 per 1 pound covers 400 to 500 square feet
|Fast drying time (2 to 4 hours between coats)||More expensive than oil poly|
|Low odor; low VOCs||Less tough than oil poly|
|Doesn’t yellow like oil polys|
|Easy to apply; good for DIYers|
Polyurethanes are today’s standard floor finish. Water-based varieties used to have a reputation for being eco-friendly (still true) but not as durable as regular polys. However, today’s water-based polys are nearly as tough as their oil-based cousins.
One difference is final color: Water-based polys dry clear; oil-based polys have a slight amber tint.
Water-based polyurethane has very low VOC content and is easy for a DIYer to apply. Three to four coats are recommended. You can use a water-based polyurethane over an oil-based poly as long as the old finish has completely cured (two to three weeks).
Especially good for: eco-conscious DIYers
Cost: $40 to $60 per gallon covers 400 to 500 square feet
|Less expensive than water-based poly||Long drying time (8 to 10 hours between coats)|
|Extremely tough||High odor during application; high VOCs|
|Easy to apply||Gets yellow with age (benefit to some)|
Oil-based polys are the mainstay of floor finishing and widely used by professional finishers.
Although they’re tough, long-lasting, and less-expensive than water-based polys, oil-based polys have a higher VOC content and stronger odor during application. A coat takes 8 to 10 hours to dry, so you’ll want to vacate your house until the floor is completely dry — and bring your pets with you. Two to three coats are recommended.
Professional floor refinishers report some problems when using an oil-based poly over a water-based poly. Best advice: Don’t do it.
Especially good for: professionally finished floors at a reasonable price
Cost: $30 to $40 per gallon covers 500 to 600 square feet; it’s $1 to $2 per square foot to have a pro do it.
Acid-Cured (Swedish) Finish
|Extremely hard and durable||Difficult to refinish (must use acid-cured finish if used previously)|
|Fast drying time (2 hours) but up to 60 days to fully cure||Volatile odors; high VOCs|
|More expensive than most finishes||Pro-only application|
The Cadillac (or Volvo) of floor finishes, acid-cured Swedish finishes are for pro application only. They’re among the toughest of all hardwood flooring finishes, and the most expensive. They’re sometimes called conversion varnish sealers.
Acid-cured finishes have extremely high VOC content; you’ll have to bunk elsewhere for a few days after finishing to give the odors a chance to clear. The finish takes up to 60 days to fully cure, but you can walk on it after three days. Keep furniture off for two weeks, and rugs off for the full 60 days so the fibers don’t stick.
Especially good for: high-end homes with flooring made from exotic woods and floors with elaborate inlay designs
Cost: $3.75 to $5 per square foot professionally applied
|Extremely durable (one of the hardest)||Extremely high VOCs (fumes may last for weeks)|
|Fast drying time allows for multiple coats per day||Low humidity extends drying time|
This is a durable finish that’s a step up in toughness and longevity from water- and oil-based polyurethane. It’s tricky to apply and isn’t recommended for DIY — it dries very fast, so speed and a deft touch are needed to avoid lap marks.
It has a high VOC content, making a respirator and good ventilation a must during application. Homeowners and pets should vacate the house during application and for up to two weeks afterward.
Especially good for: high-traffic areas and homes with multiple kids and dogs
Cost: $2 to $4 per square foot professionally applied
Penetrating Oil Sealer
|Easy for DIYers to apply||Not as durable as a poly finish|
|Non-toxic ingredients||Should be reapplied every 2 to 3 years|
Oil sealers have been used for centuries to protect and moisture-proof wood. They’re easy to apply, and spot touch-ups are a snap. Because it penetrates the wood, an oil sealer enhances grain patterns and deepens the color of the wood. The finish itself doesn’t scratch, but re-coating usually is needed every two to three years as the finish wears down.
The basic ingredient is tung oil, a naturally occurring, low-VOC oil that hardens as it dries. It needs long drying times between coats (24 to 48 hours), so finishing a floor with the recommended three coats can take several days.
Especially good for: historic homes with antique flooring; DIYers
Cost: $60 to $70 per gallon covers 500 square feet
|Extermely hard and durable (25 years)||Only available with prefinished flooring|
|Difficult to refinish|
|After 25 years, you might have to replace the flooring|
This super-tough finish only comes on prefinished wood planks. You won’t apply it yourself, but you’ll need to know it’s there if you ever decide to refinish it. It requires special refinishing techniques, like sanding with milder grits before using heavier grits. Your floor refinisher can determine if your flooring is covered with an aluminum oxide coating.
|Easy to work with||Not very durable|
|Few harmful VOCs||Most shellac contains wax — refinishing with modern products isn’t possible|
|Inexpensive||Must be recoated periodically|
|Easy spot repairs|
Polyurethane floor products have surpassed the usefulness of this time-honored wood finish. Houses built before 1970 may have hardwood floors finished with shellac, and you can maintain and refinish them with another coating of shellac. It’s not compatible with more modern finishes, such as polyurethane, so only refinish shellac with wax or another coating of shellac.
Test for shellac by dribbling a few drops of water on an inconspicuous spot. If the finish turns milky white, it’s shellac.
Shellac is a natural product that’s non-toxic and produces few VOCs. It’s not as tough and durable as polyurethanes, and is susceptible to stains from water and other spills. However, it’s easy to repair scratched areas by rubbing out the scratches with denatured alcohol, then reapplying shellac.
Shellac pairs well with wax. Use shellac as a base coat, and finish with two or three coats of hand-rubbed wax.
Especially good for: refinishing antique floors already coated with shellac
Cost: $80 to $90 per gallon covers 300 square feet
Two Options for Refinishing
Does your floor need a touch-up or an overhaul?
1. Touch-up. For surface scratches and normal wear and tear, lightly sand the finish (called screening) and apply a new topcoat. You’ll want to use the same type of finish product that was on your flooring originally.
2. Overhaul. For more damaged flooring, you’ll want to completely sand the old finish off down to the bare wood. Once you’ve done that, you can apply any finish.
Ultimately, the choice is yours to decide on the best finish for your lifestyle and budget. DIY is a tempting option for budget conscious folks, but be cautious that you’re not biting off more than you can chew so you don’t end up having to overpay to fix errors by ultimately hiring a professional anyways.
Was this article helpful? Let us know what you think below!